72 Fibers Rack Mounted ODF Optical Distribution Frame Unit With Slidable Fiber Tray

How To Choose A Right ODF & Fiber Patch Panel for Your Project?

Begate provide many kinds of fiber patch panel and fiber terminal box. Some partners may be confused by the various options. So how to select the correct one? Firstly you need to know the install way you want, mainly two ways rack mounted and wall mounted, if it is rack mounted, you need to choose the one with standard 19 inch width then it can be installed with other cabinet and distribution frame. If it is wall mounted, you can choose wall mounted patch box or terminal box according to your requirement on size and fiber capacity. Send, you need to consider the fiber capacity, generally the 1U rack mounted patch panel is with max. 48 fibers capacity, if you need bigger capacity, you can consider the one with higher height like 2U, 4U and so on. If you need small capacity, fiber terminal box is the best choice. Third, you need to consider the adapter type, of course most our box can be with different adapter panel, but you still need to decide which type you need so that we can provide the right one. SC, LC, ST and FC are available for options. And you also need to consider the application environment, if it is outdoor, it is better to use the waterproof box and if it is on corridor, the wall mounted type will be better, if it is in data center, they always use rack mounted.

Benefits Of Optical Fiber Distribution Frame Unit

1, The splice module is with light weight, slidable and changeable;

2, Can be pre-loaded with adapter and pigtail, so it can connect and splice directly without extra assembly;

3, With winding ring to manage the extra fibers and makes the fiber distribution tidiness and can be protected in security;

4, Fiber patching is clear and tidy;

5, Label for splicing, fiber channel are completed and clear;

6, Reliable grounding setting;

7, Install fiber adapters on the front side of splice tray in a bayonet way at an oblique angle of 30 degrees to ensure curve radius of optical fiber and prevent eyes from being damaged by laser light at the same time;

8, Comprehensive accessory kit for installation, cable entry and fiber management;

9, Suitable for fusion splicing, direct termination and pre-terminated cables;

10, Width options: 19”, 21" and 23" racks;

11, Different height 1RU, 2RU, 3RU 4U to 8RU with different capacity for options;

12, Suitable for bundle, ribbon and single fiber.

Main Parameters Of Rack Mounted ODF Unit

Customized Items for ODF Unit

1, Color: Black, Grey or else

2, Spraying material

3, Body material: cold rolled sheet or Aluminium sheet

4, Sheet thickness: 1.0mm, 1.2mm, 1.5mm or else

5, Pigtail and adapter: SC, LC, FC, ST

6, Accessories: screw, shrinkable protection sleeve, cable tie etc.

7, Print logo

8, Packing

Factory Tour

Similar Products